Bike-Lift M516-001, Руководство по эксплуатации и обслуживанию

Страница: 28 / 50

Operating manual number
057-2-6-0001-R0
Page 28
Version 2021
EN
7.2 Unloading operations
1- Reassemble the ascent ramp;
2- Make sure that the scissor sliding guides are free from foreign bodies (bolts or other
objects would stop the descent and could cause serious damage or dangerous jolts);
3- Use the pump to raise the lifting platform with about 3 cm, then release the safety bar
(Figure 6, [3]) through the special lever placed sideways. Operate the descent control;
4- When the descent is complete, free the motorcycle from the belts;
5- Open the locking vice of the front wheel (if present);
6- Lift the motorcycle kickstand and lower it using the brakes to stop it.
7.3 Lifting types
7.3.1. HYDRAULIC FOOT PUMP - element code - 001
The hydraulic foot pump (Figure 7) allows generating a pressurised oil flow rate.
Figure 7 – Hydraulic foot pump
The operation is very simple: press the foot pedal repeatedly, making it move alternately from
top to bottom to generate hydraulic pressure. By stopping the action on the pedal, the pump
will stop but will remain under pressure.
Read carefully the attached use and maintenance Manual:
Hydraulic foot pump PPSE HV Hydraulic.
CAUTION: The foot pump is supplied with a specific oil plug for Transport. It is
absolutely necessary to replace the Transport oil plug with the normal operating
one supplied, before using the foot pump.
ASCENT BY
PUMPING
CONTROLLED
DESCENT