Bike-Lift M516-001, Руководство по эксплуатации и обслуживанию

Страница: 30 / 50

Operating manual number
057-2-6-0001-R0
Page 30
Version 2021
EN
7.3.4 ELECTRONIC WITH REMOTE CONTROL - element code 004/R
Lifting is carried out by using a remote control connected to the hydraulic pump via a remote
control radio receiver.
Figure 10 – remote control button panel with maintained action control
The remote control is equipped with two buttons with maintained action which allow the
ascent and descent. Once the controls are released the lifting platform stops instantly.
7.3.5. ELECTRO-HYDRAULIC PUMP built-in system - element code - 003/F
In case of the built-in system, lifting takes place using the button panel (Figure 11). On the
panel there are:
- the ascent and descent buttons;
- the emergency button;
- a button to bypass the safety devices to be activated upon descent at a distance of less
than 20 cm from the ground, to cancel the effect of emergency stop of the proximity
sensors installed on the platform which prevent further unauthorised descent.
Figure 11 – panel for the floor system
DESCENT
ASCENT