Bike-Lift HQL 400, Руководство по эксплуатации и обслуживанию

Страница: 21 / 35

Operating manual No. 057-2-6-0012-R0 Page 21
Version 2021
EN
6 Dismantling/scrapping section
6.1 Dismantling
Follow the Regulations regarding the materials dismantling in force in the country where the
machine will be dismantled.
Here are some useful indications in case you must disassemble the machine to reassemble it in other
areas, store it or demolish it.
6.2 Mechanical dismantling
Before proceeding with mechanical dismantling of the machine, carefully clean the whole structure
(see
Cleaning and Maintenance ).
Before removing the machine from its housing, remove all moving parts by proceeding to the
opposite of what is described in the
Installation chapter.
For the lifting modes and the relative specific safety precautions, refer to the Transport, Handling
and Storage chapter.
6.3 Scrapping
The dismantling operations of the machine must be carried out in total safety by using the
protections.
At the end of the machine's life it is necessary to proceed to the proper dismantling of the
components that are listed with reference to the interested party:

Support structure: Fe 360/S235

Hydraulic cylinder: Fe 360/S235

Paint: Epoxy powder

Gaskets: Polyurethane rubber

Oil: Hydraulic ISO VG 1O (W32)
Demolish the different types of machine components in appropriate landfills.
Always comply with the Legislation in force in the Country where the machine is used.