Bike-Lift HQL 400, Руководство по эксплуатации и обслуживанию

Страница: 15 / 35

Operating manual No. 057-2-6-0012-R0 Page 15
Version 2021
EN
sole responsibility of the Purchaser or the Machine's user.
Finally, we remind you that the handling, installation, use, maintenance and putting out of service
of the machine represent a source of danger if these operations are not performed in compliance
with the requirements of this Manual or without the necessary caution and attention required.
(More details regarding the Risk Assessment to be requested from the Manufacturer).
3.4 Operator protections
Before starting any type of work on the lifting platform, the operator must
wear appropriate personal protective equipment (PPE), such as gloves and
safety footwear.
Always wear work clothing normally used in the mechanical workshop
activity.
3.5 Safety systems
The fall protection system (shown in yellow in the following figure) consists of:
a mobile anchoring toothed bar with automatic coupling that
prevents accidental descent of the mobile surface.
The lifting piston has a
parachute valve
that locks the cylinder in case the oil cable is blanked.
ALWAYS keep the mechanical lock hooked during work, in order to weigh down the
weight of the structure and of the vehicle standing on it even on the toothed bars at
the base.
During the use of the lifting platform it is very important to pay the utmost attention to the ascent