37
www.bikefriday.com
800-777-0258 • +1-541-687-0487
5. Attach Trailer Tongue
Take the long trailer tongue
and remove the thumb nut
and one washer from the
threaded stud. Slip the hol-
low end of the tongue over
the end the of the T-bar so
that the threaded stud in the
tongue fits into the remain-
ing hole in the case.
Fig. 5 Trailer tongue over T-bar.
Accessories: TravelTrailer
4. Add Thumb Nuts
Place one of the flat washers
over each threaded stud, and
then loosely thread on the
thumb nuts—do not tighten
them yet.
Fig. 4 Attach washers & thumb nuts.
6. Add Last Thumb Nut
Place one flat washer over the
threaded stud inside the case
and add the last thumb nut.
Now securely finger tighten
all three thumb nuts inside
the case. Each attachment
point should be a sandwich
consisting of trailer frame,
flat washer, nylon case, flat
washer and then thumb nut.
Fig. 6 Tongue thumb nut.
