- DE
57
-
•
Verbinden Sie den Vakuumbehälter über einen Vakuumschlauch mit dem Gerät.
•
Schließen Sie den Deckel ordnungsgemäß, indem Sie diesen an beiden Seiten nach
unten drücken.
•
Drücken Sie zweimal hintereinander auf die Taste „VAC SEAL“, um das Vakuum in Ihrem
Behälter aufzubauen.
•
Entfernen Sie den Schlauch vom Vakuumbehälter und anschließend vom Vakuumiergerät.
Fehlerbehebung
Bitte folgen Sie den nachstehenden Anweisungen, um Probleme schnell beheben zu
können und Schäden an Ihrem Gerät zu vermeiden. Sollte das Problem weiterhin auftreten
oder sollten Sie Fragen zu dieser Tabelle haben, stehen wir gerne zu Ihrer Verfügung.
Problem
Lösung
Das Vakuumiergerät funktioniert nicht.
1. Stellen Sie sicher, dass das
Vakuumiergerät mit der Steckdose
verbunden ist und dass diese mit Strom
versorgt wird.
2.
Stellen Sie sicher, dass das Stromkabel
und das Vakuumiergerät nicht beschädigt
sind. Aus Sicherheitsgründen, darf ein
beschädigtes Vakuumiergerät nicht
betrieben werden.
Die Vakuumpumpe läuft, aber der Beutel
wird nicht vollständig abgesaugt oder
verschweißt.
1. Legen Sie den Beutel erneut ein und
wiederholen Sie den Vorgang. Stellen
Sie sicher, dass das offene Ende des
Beutels im Vakuumkanal liegt.
2. Stellen Sie sicher, dass die
Schaumstoffdichtung nicht locker oder
beschädigt ist. Die Schaumstoffdichtung
kann entnommen, gereinigt oder sogar
ersetzt werden.
3. Stellen Sie sicher, das sich
keine
Lebensmittelreste
im
Versiegelungsbereich und um den
Schweißdraht befinden. Entfernen Sie
eventuelle Lebensmittelreste. Stellen
Sie sicher, dass der Schweißdraht
richtig positioniert ist.
4. Stellen Sie sicher, dass das
Vakuumiergerät richtig für den Betrieb
verriegelt wird.
5.
Stellen Sie sicher, dass das andere
Beutelende richtig versiegelt wurde.