1. Names
2. Details of the LCD Display
3. Details of the operation panel
NAME OF THE PART
4
MEGA Wrench Adapter
MEGA chuck series exclusive adapter. The adapter
is provided with one-way clutch. Since the adapter
is interchangeable, select the adapter that
corresponds to the size of the collet chuck used.
Recharging jack
It is the jack used to connect the included recharging
device (AC adapter) and recharge the wrench.
LCD -Display
It displays the bar graph, the value of the tightening
torque and the setting details.
Handling panel
Each operation is executed using the panel’s buttons.
Grip
The grip vibrates and a sound is emitted when the set
torque is reached.
Effective length line (Force point)
It indicates the point where apply the force when
tightening.
MEGA Wrench Adapter
Recharging jack
LCD Display
Grip
Operation panel
Effective length line
(Force point)
Numerical display
It indicates the value of the tightening torque or the setting values.
Bar graph
It indicates, in real time, the ratio in relation to the set
torque on the bar graph. And since the scale is divided in
different colours it is also possible to obtain a midway value.
Low battery indicator
It is displayed when the battery’s energy is low and it is
necessary to recharge it. At the same time the buzzer
will emit a sound for 30 seconds and after, the device
will automatically power off.
Buzzer
It indicates that the buzzer is active. (It is always displayed.)
Recharge indicator
The red LED turns on when recharging the product.
DC IN
It indicates the location of the recharging jack.
PEAK hold indicator
The symbol is displayed when the PEAK hold
function is worked.
ON/OFF button
It is used to turn ON or OFF the power.
MODE button
It is used to switch between the “Working mode” and
the “Setting mode”.
▲
button
If pushed in the “Setting mode”, it displays the previous setting.
▼
button
If pushed in the “Setting mode”, it displays the successive setting.
PEAK button
It is used for the PEAK hold function.
CLEAR button
Using this button while the PEAK hold function is
worked will reset the measurement value.
Red scale
Orange scale
Green scale
20 - 80%
80 - 100%
100 - 120%
・
・
・
The and buttons can only be used in the “Setting mode”.
ON/OFF
MODE
PEAK
CLEAR
DC IN
PEAK
MGR-TL/P
▲
▲
