OUTLINE OF THE OPERATION MODES
5
No.
Display code
Suitable
collet chuck
Recommended
torque (N
･
m)
The Digital MEGA Torque Wrench is provided with two modes: the “Working mode” to perform the actual
tightening operation and the “Setting mode” to select the recommended torque suitable for the collet chuck.
The outline of each operation is explained in this section.
1. Working mode
The bar graph is linked to the torque.
The value of current tightening
torque is displayed in real time.
2. Setting mode
This mode is used for executing the tightening operation.
It is active when the power is turned ON.
In the LCD, the current tightening torque is displayed in
real time and the bar graph is linked to it.
If the PEAK hold function is active, it is possible to keep
the highest value of the tightening torque.
In the Digital MEGA Torque Wrench, the recommended
tightening torque for each collet chuck is preset in
advance. In the “Setting mode” it is possible to display
the preset values and to select the suitable setting.
When the “Setting mode” is selected, a code indicating
the name of the suitable collet chuck is displayed for 2
seconds and then its recommended tightening value is
also displayed.
The recommended tightening torque for each size of
Mega New Baby Chuck and Mega E Chuck is preset in
the Digital MEGA Torque Wrench.
The details of the preset settings are indicated in the
table below.
Each setting can be displayed on the LCD by pushing the
buttons on the operation panel.
If the
button is pushed, the settings will be displayed on
the LCD following the order below.
(Pushing the
button will display the settings in the
opposite order.)
Code of the collet chuck (2 seconds)
Recommended tightening torque
Example of the setting mode
3. Concerning the preset
1
2
3
4
5
6
7
8
9
10
12
19
35
40
45
50
20
35
40
50
MEGA 6N
MEGA 8N
MEGA10N
MEGA13N
MEGA16N
MEGA20N
MEGA 6E
MEGA 8E
MEGA10E
MEGA13E
n06
→
n08
→
n10
→
n13
→
n16
↑ ↓
↓
E13
←
E10
←
E08
←
E06
←
n20
▲
▲
▲
▲
