3
1. Concerning the handling of product
Do not use or store the product in the
following locations.
Locations with high humidity and elevated
temperature
Locations with a lot of dust
Locations with strong vibrations
Unstable locations
Locations where water or oil may invade the
product
Locations with strong magnetic fields
Store the product accurately when you
do not use it.
Do not let enter metallic or inflammables
objects into the device.
Do not step on the product or place
objects on it.
Do not throw or hammer the product.
Caution
SAFETY NOTES
Do not use the cable near very hot locations
or places with oil or sharp corners.
Recharge the product in a place where the cable
does not get stuck, stepped on or does not get
damaged by receiving excessive stresses.
It may cause electric shocks or short-circuits.
2. Recharging and the battery charger
Do not store the product or the battery charger
in a location with a temperature above 50 .
The conditions of the recharging device
and of the built-in rechargeable battery may
worsen.
Do not handle the battery charger’s cable
carelessly.
Do not carry the cable around and do not remove
the cable from the power socket by pulling it.
Do not handle the product in an unnatural posture.
Always stabilize your feet and maintain a
balanced position.
Always maintain the grip clean and dry.
Do not let oil, grease adhere to the grip.
Always inspect the wrench before using it.
Before the use, inspect each part to check if
they present dents or not and also check if the
product and its functions work correctly.
3. Concerning the handling of the product
Use the product only for the applications
indicated in this manual.
Do not use the product for operations
above its specifications.
Do not use the product in a cluttered
location or working table.
Do not let other people come close to the
operator when using the product.
SAFETY NOTES REGARDING THE USE OF THE PRODUCT
Respect the following notes for a safe and correct use of the product.
If anomalies are discovered during the use of the product, stop immediately the operation and contact after
turning off the product.
Before using the product perform a starting inspection and control the settings.
Be aware that using the product in places with strong magnetism may damage it.
Be aware that if the product comes in contact with water or oil, it may get damaged or start a fire.
Dropping or hitting the product may cause breakages or damages.
Do not use the product as a hammer or a lever.
When tightening, hold the grip firmly on the valid line (force point) and apply a perpendicular force to the torque
wrench (up and down or right and left).
It is recommended to perform regular torque inspections. Place your inspection request to using our
distributors.
・
・
・
・
・
・
●
●
●
●
●
●
●
