Step 3: Install / Set discharge orientation for blower
(if not already configured as needed for your application).
Duct connection detail: 6” round at discharge. Recommended duct size: 6” min., 8” max.
Figure A:
Set Discharge Direction, Attach Blower
Unscrew blower plate and set to top or rear
discharge if not already set correctly. Screw
blower to plate with included hardware
Figure B:
Connect Plate Internally
Re-install all mounting screws inside of liner.
Figure C:
Connect Plate Externally
Re-install all mounting screws outside of liner.
Figure D:
Connect Power Supply
Plug 6-pin connector from one of the control harnesses
to blower. Unused harness may be tied securely to other
harness to prevent vibration
INSTALLATION INSTRUCTIONS
bigchill.com
9
