INSTALLATION INSTRUCTIONS
Figure E: Remove Mounting Screws
Remove Philips screws in front and back
of liner that attach it to the outer shell.
Screws are located behind scalloped
detail in flange front and back.
Step 2: Remove ventilation hood liner from outer shell. (Figures A through F)
–
save all components and fasteners as
they will be used to reinstall the liner after the hood shell is mounted to the wall.
Figure A:
Remove Baffle Filters
Pull filter(s) towards front of hood and tilt
rear of filter down to remove.
Figure C:
Remove Inner Shield
(only on models that
require blower installation or discharge
reorientation)
Remove Philips screws (front and back)
attaching shield to ventilation hood liner.
Figure D:
Remove Control Panel
Remove screws attaching panel to
ventilation hood liner. Disconnect control
and light harnesses.
Step 1: Read all instructions thoroughly before beginning installation.
Please review all steps before beginning
–
for some installations, the order of assembly may be altered.
Figure F: Remove Liner from Shell
Carefully slide liner out of outer shell.
Remove any protective film from exterior
of liner and baffle filters.
8
(877) 842-3269
Figure B:
Remove Rear Filter Holder
Turn wing fastener(s) ¼ turn to unlock.
