USE & CARE INSTRUCTIONS
Cleaning the Interior
Clean the interior of the hood using a soft cloth and warm soapy water or denatured alcohol as needed. Do not
clean the electrical parts or blower with liquids or solvents. Allow to dry thoroughly before restoring power.
Cleaning the Exterior
It is important to follow the direction of the metal grain with the cloth. Do not use chemical solvents, aggressive,
grainy or abrasive products or similar products that could damage the surface of the hood. Test in an
inconspicuous location if you are concerned about a particular cleaner. For various finishes, see details below.
•
Painted with Gloss Finish
Clean with a soft cloth and quality glass cleaner or warm soapy water. Follow all label instructions.
•
Brushed or Polished Stainless Steel (Strapping, Utensil Rails
– some models)
Clean with a soft cloth and quality stainless steel cleaner or warm soapy water. Follow all label
instructions. Do not polish across the grain or in circles.
•
Brushed Brass, Brushed Copper (Strapping, Utensil Rails
– some models)
Clean with a microfiber cloth using Endust, Pledge (or similar cleaner) or warm soapy water. Follow all
label instructions.
For cleaning the hood, it is recommended to use a soft cloth and a solution of warm soapy water. It is important
that the soap does not contain granules that could scratch the surface. Follow the direction of the metal grain with
the cloth. The cloth must have no buttons or fasteners that could scratch the surface. Do not use chemical
solvents, aggressive, grainy or abrasive products or similar products that could damage the surface of the hood.
Test in an inconspicuous location if you are concerned about a particular cleaner.
Turn off power at the service panel prior to cleaning the hood.
WARNING
!
14
(877) 842-3269
