24
February 2022
Installation, Operation and Maintenance Manual
MAN 607 Rev. 6
Section 3: Operation and Use
Operation and Use
Figure 24
Cam adjustment
If the index (Figure 25) does not signal the proper position of the valve but is turned by 90°:
•
Remove the roll pin placed on the position indicator (index).
•
Turn the indicator until reaching its proper positioning.
•
Put the roll pin back in its position.
NOTICE
End of stroke microswitches should be operated before the stop of the stroke of the
actuator due to mechanical stops. Adjust the relative cams properly.
Figure 25
Position indicator and pin for microswitches box
Position
indicator
(index)
pin
