8
CT USE INSTRUCTIONS
The CT is used to ensure the pulse being created will always be
produced at the peak of any excessive neutral current.
WARNING
Always install and remove the CT with the unit off.
Never clamp CT around a conductor until connected to unit.
1.
With power off of the unit, plug the CT into the back of the
transmitter.
2.
Clamp the CT around the neutral between the cable and the
common neutral. The unit will do the rest
3.
When removing, always turn the unit off first and remove
the CT from the cable before unplugging from the unit.
Technical & Service
Bierer & Associates Inc.
Manufacturing & Repair
10730 Farrow Rd.
Blythewood, SC 29016
Tel: (803) 786-4839
Fax: (803) 786-5457
www.bierermeters.com
