Bien Air 1700544-001, Инструкция по эксплуатации

Страница: 66 / 84

61
FIG. 1 FIG. 2 FIG. 3 FIG. 4 FIG. 5
1
2
3
4
10
6
7
8
9
5
16 Operation - Surgery mode
It is only possible to access the surgery mode with the iOptima
INT
and MX-i LED micromotor system.
To set a holder with the MX-i LED micromotor, please contact a
service engineer certified by Bien-Air Dental SA.
If only one holder is set, it will not be possible to access any other mode.
16.1 Enter Surgery mode
FIG. 1
Tap to enter the surgery mode.
Predefined oral surgery operations are available by default, it is
possible to modify and restore them.
It is possible to create and delete User-defined operations.
Note 1
16.2 Operative screen description
FIG. 2
The operative screen displays the selected operation type and
settings:
(1) Settings (access to operation types and settings)
(2) Selected operation type
(3) MX-i LED micromotor rotation mode: FORWARD and
REVERSE
(4) Save (customize settings)
(5) Light intensity
(6) Handpiece ratio
(7) Maximum MX-i LED micromotor torque in Ncm, indicative
percentage of maximum torque that can be delivered is also
displayed (or according to settings, see chapter “13.7 Set-
tings” on page 45)
(8) Maximum MX-i LED micromotor speed in rpm
(9) Back to the previous screen
(10) Irrigation level
Note 2- 3
See chapter “16.3 Standard Use - Operating mode (Start)” on page 63.
16.2.1 MX-i LED micromotor Speed & Torque
FIG. 3
Slide to adjust the maximum speed and torque values.
Or tap the icons to enter a precise value.
FIG. 4
Enter the motor speed and torque values and tap Cancel or Done
to validate.
Note 4