NOZ2 M
ANUAL
M
AINTENANCE
Manual version 6.0 - North America (10-03-2017)
en-73
en
6.4
Replacing or cleaning the filter
A filter module is available as an accessory. This is mounted on
top of the unit.
This module contains a tray, inside which is the filter material.
By default, the filter tray contains a class G2 filter material. You
can clean the filter material with a vacuum cleaner, for
instance. After several cleanings, however, you must replace it.
New filters are available from Biddle.
1. Undo screws
1
and
2
(
2
is not visible in the drawing,
but, just like
1
, is located half-way along the side).
2. Remove tray 3 from the unit.
3. Clean or replace the filter material.
Caution:
c
When replacing the filter material, you must ensure
that you place the material with the correct side
facing upwards.
4. Place the tray back into the unit.
5. Fasten the screws again.
