Biddle NOZ2 25, Руководство пользователя

Страница: 44 / 88

I
NSTALLATION
A
IR HEATER
en-44
en
For models with b-touch control panel
1. Place the control panel back into the wall holder.
When you connect the control panel, the control panel
searches for connected units and then briefly displays the
number of connected units.
Caution:
c
If the number of units displayed does not match the
number connected, check the wiring and power
supply of the units and reconfigure the system via
menu > Maintenance > Reset system .
Optional:
Lock the control panel with the screw on the
underside.
During the first start-up, the installation guide is initiated.
Go through this in order to make the most necessary set-
tings.
If the installation guide is not displayed, it can be started via
menu > Maintenance > Installation .
If the control panel does not work, or if the display shows
an error message, there is an error: consult the relevant
section.
Note:
n
The settings of the b-touch control panel can be
copied to another b-touch control panel. See
7.9 Copying the settings .
Note:
n
After installation, the control panel may possibly be
removed. See
2.10.1 Special points regarding the
control panel for the conditions.
For all models:
1. Check whether the fans are rotating.