EN
20
Cleaning of the Jar (incl. Lid) and Motor Base
Cleaning of the jar and lid
Caution when cleaning:
The stainless steel blade can cause injury!
The
jar
is not
suitable for the dishwasher!
• Clean the jar immediately after each use.
• The jar can be cleaned with a soft brush or dish cloth under running water.
• Do not use aggressive or abrasive cleaning agents or solvents.
• Clean the jar with a mild cleaning agent (detergent) or fill 2 cups of water into the jar, add some detergent, close the lid (incl.
measuring cup and seal ring) and press the Pulse button for some times.
• The silicone seal of the lid can be removed for easy cleaning. Before mixing make sure that the silicone seal is correctly mounted
again.
Make sure the motor base are dried properly, when putting on the jar.
• When placing the jar onto the motor base, make sure that the contacts are completely dry.
•
Do not
set the jar upside down when drying. Always set the jar on the base.
Cleaning of the motor base
Carefully when cleaning:
Always remove the power plug from the outlet before cleaning.
• Clean the motor base with a soft and damp cloth,
• Do not use any aggressive cleaning agents or solvents,
• Never immerse the motor base in water or other fluids (danger of short circuit),
• Never rinse the motor base under running water (danger of short circuit).
If water has entered the motor base, disconnect the power plug and contact your service immediately.
Cleaning the tamper T42L
• Do not clean the display under running water, use a moist cloth.
• Do not clean the rammer in the dishwasher, otherwise the electronics will be damaged.
!
!
!