39
38
EN
EN
9. Troubleshooting
Blocked unit / capsule:
Should a capsule not be inserted
properly, the coffee maker will try to
fix it into its housing automatically. If
the procedure runs smoothly, dispen-
sing will start automatically, otherwi-
se, the capsule will get stuck and will
have to be removed manually.
In the event that the system cannot
complete the closing and remains
blocked, the touch-sensitive button
will start blinking with the following
sequence: red – red – green (Fig.10).
It is therefore necessary to extract
the capsule with a pair of tweezers
or push it down into its housing, then
close the insertion door, turn the ma-
chine off and then on again in order
to run a new verifi cation cycle.
Should neither of these options solve
the problem, contact the nearest
service centre.
Failure to eject the used capsule:
It may happen that the capsule
remains into its housing despite
the machine does not have any
malfunctioning; this is due to
pressure, that causes the capsule
to get stuck to the gasket. Should
this happen, repeat the dispensing
cycle by closing the insertion door
to start dispensing; press the tou-
ch-sensitive button to stop it and
wait until the capsule has been
ejected.
If this operation is not successful,
extract the capsule with a pair of
tweezers.
8. Cleaning and maintenance
DESCALING
8
• Make sure no capsule has been in-
serted and that the insertion door is
completely closed.
• Fill the tank with water and add a
dose of scale remover specifi c for
coffee machines (easily available
through retailers) (Fig.8).
ALWAYS FOLLOW THE INSTRUCTIONS
PROVIDED BY THE MANUFACTURER
WHEN USING DESCALING PRODUCTS.
A
B
9
• Place an empty container on the rack (4).
• Make sure the insertion door (1) is closed “A”.
• ouch the touch-sensitive button (2) “B”, the dispensing unit starts dispensing
hot water (Fig. 9)
• Touch the touch-sensitive button again to stop dispensing
• Repeat this operation until there is no water left in the tank.
• To fl ush any solution residues from the circuit, repeat this cycle, this time using
clean water in the tank.
WE RECOMMEND YOU PREPARE TWO CUPS OF COFFEE AD THROW THEM AWAY
BEFORE PROCEEDING WITH USUAL DISPENSING, IN ORDER TO PRESERVE THE
FINAL RESULT.
THE DESCALING SOLUTION CAN BE HARMFUL. AVOID CONTACT WITH
EYES, SKIN AND SENSITIVE SURFACES. NEVER USE ANY PRODUCT
OTHER THAN SPECIFICALLY CONCEIVED FOR DESCALING TO AVOID
DAMAGE TO YOUR MACHINE.
10
