BH G820, Инструкция по сборке и эксплуатации

Страница: 15 / 39

G820
15
GENERAL INSTRUCTIONS.-
Carefully read through the instructions contained in this
manual. It provides you with important informa- tion
about assembly, safety and use of the machine.
1
This unit has been designed for home use.The user
weight does not have to exceed 130kg.
2
Keep your hands well away from any of the moving
parts.
3
Parents and/or those responsible for children should
always take their curious nature into account and how
this can often lead to hazardous situations and be-
haviour resulting in accidents. This unit does not have
to be used in any case like toy.
4
The owner is responsible for ensuring that anyone
who uses the machine is duly informed about the
necessary precautions.
5
Your unit can only be used by one person at a time.
6
Use suitable clothing and footwear. tie up your
shoelace correctly
1.-
ASSEMBLY INSTRUCTIONS.-
Open the cardboard box as shown in Fig.1.
Take out all of the assembly pieces and remove the
packing sections (1), (2) and (3) but not packing
section (4). Check that all of the assembly pieces are
present, Fig.2.
ATTENTION: The assistance of a second person is
recommended when assembling this machine.
Fig.2 Parts list:
(A) Main body.
(B) Handlebar.
(C) Monitor.
(D) Rear stabiliser support.
(H2) Right focus bar.
(H1) Left focus bar.
(E) Rear stabiliser bar with adjustable feet.
(K) Transformer.
(F) Front stabiliser bar with wheels.
(J1) Screw M-8x15.
(J2) Flat washer M-8.
(J3) Screw M-10x75.
(J4) Flat washer M-10.
(J5) Spring washer M-10.
(J6) Allen screw M-8x70.
(J7) Self-locking nut M-8.
(J10) Spring washer M-8.
Allen key 6mm.
Allen key 6mm.
Allen key 5mm.
Combination spanner 13-17.
2.
FITTING FRONT STABILISER BAR WITH
WHEELS.-
ATTENTION: The assistance of a second person is
required for this stage of the assembly.
Bring the front stabiliser bar with wheels (F) to the main
body (A) positioning the wheels at the front of the unit,
Fig.3, Insert the screws (J1), and spring washer (J2),
and tighten securely.
3.-
FITTING THE ADJUSTABLE FEET TO
THE REAR STABILISER.
Take the rear stabiliser with adjustable feet (E), and
line up the dots, Fig.4. Insert the screws (J1), and
spring washer (J2), and tighten securely.
4.-
FITTING THE REAR STABILISER.
With the help of another person, first lift the main body
(A) in the direction of the arrow, as Fig.5 shows, keep
the stabiliser with wheels (F) resting on the ground, as
shown in Fig.6.
While one person holds the main body (A), the other
person fits the rear stabiliser support (D) onto the
connector piece on the main body (A), Fig.6.
Fit the bolts (J1) Fig.6A, along with the spring washers
(J10) and flat washers (J2), and tighen securely.
5.-
FITTING THE FOOT REST FOCUS
BARS.-
Move the top part of the right foot rest focus bar (G2) in
the direction of the arrow, Fig.7, to the arm on the main
body (A), and insert it into the arm (A) Fig.7A.
Fit the bolt (J3) Fig.7A, along with the spring washer
(J5) and flat washer (J4), and tighen securely.
Now move the foot rest section (G2) in the direction of
the arrow, Fig.7, to the controller arm on the main body
(A) and insert it into the arm, Fig.7B.
Fit the bolt (J6) Fig.7B, along with the spring washers
(J2) and the self-locking nut (J7), and tighen securely.
Perform the same as done with the right footrest focus
bar assembly (G2) to assemble the left footrest focus
bar (G1).
6.-
FITTING THE HANDLEBAR.-
First, release the guard plate (M), Fig.8, by loosening
the screws (N), and put the pieces in a special
container.
Now bring the handlebar stem (B) up to the connector
section on the main body (A), Fig.9, connect the
terminal (B1) on the handlebar to terminal (A1) on the
main body (A) Fig.9A, then connect terminals (B2) with
the terminals (A2) Fig.9A.
Insert the handlebar stem (B) in the direction of the
arrow onto the connector section on the main body (A),
Fig.9. taking care not to pinch the cables.
Fit the bolts (J1) along with the spring washers (J2),
Fig.9B, and tighten securely.