BH Hipower H889, Инструкция по сборке и эксплуатации

Страница: 10 / 34

10
GENERAL INSTRUCTIONS.-
Carefully read through the instructions contained in
this manual. It provides you with important
information about assembly, safety and use of the
machine.
1
This unit has been designed for home use.The
user weight does not have to exceed 150kg.
2
Keep your hands well away from any of the
moving parts.
3
Parents and/or those responsible for children
should always take their curious nature into account
and how this can often lead to hazardous situations
and behaviour resulting in accidents. This unit does
not have to be used in any case like toy.
4
The owner is responsible for ensuring that
anyone who uses the machine is duly informed
about the necessary precautions.
5
Your unit can only be used by one person at a
time.
6
Use suitable clothing and footwear. tie up your
shoelace correctly
1.-
ASSEMBLY INSTRUCTIONS.-
Take out all of the assembly pieces and remove the
packing. Check that all of the assembly pieces are
present, Fig.1.
ATTENTION: The assistance of a second person
is recommended when assembling this
machine.
Fig.1 Parts list:
(1) Console.
(3) Console cover.
(14) Main frame.
(27) Sensor wire.
(46) Pedals.
(77) Seat.
(118) Right focus bar.
(119) Left focus bar.
(120) Post.
(121) Front stabilizer.
(122) Rear stabilizer.
Fasteneers List:
(2) Screw M5x10.
(4) Screw M4x14L.
(5) Screw M10.
(6) Nut M10.
(7) Bushing.
(8) Screw M8.
(9) Flat washer.
Wrenches.
2. FITTING THE STABILIZER.-
ATTENTION: The assistance of a second person
is required for this stage of the assembly.
Remove protections from stabilizers.
Take the rear stabiliser (122) with adjustable feet
and position it on the machine’s rear stand, insert
the bolts (8) with the washers (9) and nuts (6),
tighten securely. Fig.2.
Go through the same assembly procedure with the
front stabilizer (121).
3.- ATTACHING THE PEDALS.-
The assembly instructions for the pedals must be
followed to the letter, fitting these incorrectly could
damage the screw thread on the pedal or the crank.
Right and left refer to the position that the user
adopts when sitting on the saddle to do the
exercises.
The right-hand pedal (46R), marked with the letter
(R), screws onto the right-hand crank, also marked
with an (R), in a clockwise direction. Tighten
securely, Fig.3.
The left-hand pedal (46L), marked with the letter
(L), screws onto the left-hand crank, also marked
with an (L), in an anti-clockwise direction. Tighten
securely Fig. 3.
4.- FITTING THE MONITOR.-
Take hold of the monitor (1) and bring it up to main
frame (14), connect the terminal, coming out of the
bottom of the monitor, with terminal (27) coming up
out of the top of the main body (14), Fig.4.
Attach the monitor (1) using screws (2), Fig.4,
making sure not to pinch the wires. Then attach the
monitor cover (3) using screws (4) Fig.4.
5.- FITTING THE FOCUS BARS.-
Bring the left focus bar (119) (marked with the letter
L) to the main frame (14). Use wrench to tighten.
Go through the same assembly procedure with the
right focus bar (118) Fig.5.
Join the left side shaft (81) with the left focus bar
(119) using the screw (5), the nut (6) and the
bushing (7). Go through the same assembly
procedure with the right side shaft Fig.5.
6.- FITTING THE SEAT POST.-
Assemble the seat (77) to the seat rail tube (78).
Insert the seat post (75) in the main frame (14),
choose the desired position and tighten the
adjustable knob (16). Ensure that the knob is
always tightened Fig.6.
Remarks: When you have chosen a desired
position, tighten the seat post knob until you hear a
“click”.
IMPORTANT: It is advisable to retighten these
screws after one month of using the machine.