BGU KSA 380 E, Оригинальное руководство пользователя

Страница: 22 / 40

10. Disabling and scrapping
When the processor is fully obsolete and cannot be of any longer use, it should be duly dismounted
ahead of disposal. Certain components need deactivation and dismantling in order to assure that no
further use is made by other parties and that no worn out parts are recycled for other applications.
During dismantle be alert for possible recyclable materials and components that belong to differentiated
waste collection procedures applicable in your country.
The manufacturer is not liable and undertakes no responsibility for personal injuries or damages that may
result from the recycling of worn out machine parts for eventual re-use in other applications different than
originally stated in this manual.
Dismantling procedure:
Take good note please: each and every dismantling task must be performed by authorized service centres
or trained skilled staff only!
· Pull the machine down into single components,
· Deliver each single component only to authorized waste management facilities,
· Drain oil and fuel out of respective tanks and lines before disposal of the machine,
· Remove rubber and plastic parts from the machine that must be separately disposed of.
Deactivated, clamped moving/driving parts and components are of no further risk and danger.
Electric components must be separately disposed to avoid substantial environmental threat.
In the event of the fi re on the electric deployment system of the machine, use of an explosion-proof extin-
guish system is required (for example powder fi re extinguishers).