BGU KSA 380 E, Оригинальное руководство пользователя

Страница: 17 / 40

Seite 17
Bild 24
6. Connection/disconnection to PTO drive
Do not perform any repair, adjustment, cleaning or maintenance work
whatsoever while the machine is running (disconnect PTO-drive)!
PTO-driven versions are equipped with a three-point linkage to fi t on
the one available on your tractor. The drive shaft is going to act as
linkage and driving element between the tractor and the processor
and should be therefore, duly mounted and secured by the special pins
available on the machine. (follow coupling instructions for the drive
shaft telescopic halves)
Make sure to perform accurate connection of your PTO drive
shaft both on the processor and power input side. A pictogram on the
drive shaft and showing a little tractor tells you which side must be
connected to tractor power output.
Press the detent lock inward as you slide the machine shaft onto the
tractor PTO stub shaft. Slide the machine shaft forward far enough to
make sure the detent lock has snapped into the lock position.
Secure the drive shaft with the special restraining chain to avoid
dangerous twisting.
For increased safety make sure that a minimum wrapping of 1/3 of the
total useful length is achieved. (see Figure 24“).
When buying a PTO drive shaft, make sure it has the CE mark on it
and has a Declaration of Conformity which shows it complies with the
(Safety) Regulations.
Connect and secure the PTO drive shaft in compliance with shaft
manufacturer instructions.
Never use a PTO shaft without safety guard and make sure that the
guard is the correct size and length for the drive shaft.
Before uncoupling the processor, make sure to stop the tractor engine
in order to avoid damaging the tractor power drive.