BGS technic 8848, Инструкция по эксплуатации

Страница: 4 / 12

BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Tel.: 02196 720480
Fax.: 02196 7204820
mail@bgs-technic.de
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed
BGS 8848
Timing Chain Riveting Tool
TOOL
1 Chain seperating tool, to be used as OEM Mercedes 602589023300 (Chrysler/Jeep 9312)
2 Chain riveting tool, to be used as OEM Mercedes 602589003300
3 Thrust piece, to be used as OEM Mercedes 602589026300 (Chrysler/Jeep 8947)
4 Thrust piece, to be used as OEM Mercedes 103589016300
5 Thrust piece, to be used as OEM Mercedes 602589036300
6 Thrust piece, to be used as OEM Mercedes 103589016300
7 Thrust piece, to be used as OEM Mercedes 602589026300
8 Thrust piece, to be used as OEM Mercedes
9 Thrust piece, to be used as OEM Mercedes 112589069300
10 Thrust piece fixing screw
11 Spindle for 3 mm rivets, to be used as OEM Mercedes 602589046300
12 Removal pins, to be used as OEM Mercedes 602589046301
13 Assembly link for 4 mm duplex chain, to be used as OEM Mercedes 602589026300
14 Assembly link for 4 mm simplex chain, to be used as OEM Mercedes 602589026300
15 Plate and clip for 4 mm assembly links, to be used as OEM Mercedes 602589026300
16 Assembly link for 3 mm duplex chain, to be used as OEM Mercedes 602589024000
17 Assembly link for 3 mm simplex chain, to be used as OEM Mercedes 602589024000
18 Plate and clip for 3 mm assembly links, to be used as OEM Mercedes 602589024000
ATTENTION
Read the operating instructions and all safety instructions contained therein carefully before using the
product. Use the product correctly, with care and only according to the intended purpose. Non-
compliance of the safety instructions may lead to damage, personal injury and to termination of the
warranty. Keep these instructions in a safe and dry location for future reference. Enclose the
operating instructions when handing over the product to third parties.
INTENDED USE
The riveting tool is used for replacing or riveting simplex and duplex timing chains with 3 mm or 4 mm
chain pins. The new timing chain is pulled over the sprockets with the help of the old chain and finally
riveted, which means that the timing chain case does not have to be dismantled.
SAFETY INFORMATIONS
•
Do not use the tool if parts are missing or damaged.
•
Use the tool for the intended purpose only.
•
Be careful when working on running engines. Loose clothing, tools and other objects can be
caught by rotating parts and cause serious injury.