BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Tel.: 02196 720480
Fax.: 02196 7204820
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed
SAFETY INFORMATIONS
•
This tool is not suitable for impact wrenches. Using of an impact wrench can burst tool parts
and flying tool fragments can cause injury.
•
These instructions serve as brief information and in no way replace a workshop manual. For
technical information such as torque values, information on dismantling / assembly, etc.,
please always refer to the vehicle-specific service literature.
•
Always grease the spindle thread before using the tool.
•
Keep children and unauthorized persons out of the work area.
•
Do not allow children to play with this tool or its packaging and keep this tool out of the reach of
children.
ENVIRONMENTAL PROTECTION
Recycle unwanted materials instead of disposing of them as waste. Packaging should be
sorted, taken to a recycling centre and disposed of in a manner which is compatible with
the environment. Contact your local solid waste authority for recycling information. Dispose
of this product at the end of its working life environmentally.
REMOVING
Remove the securing screw of the injector.
Remove the electromagnet of the injector.
Pressing down the cloverleaf-shaped washer and remove
retaining clip.
Remove retaining clip, washer and spring.
