BFI Automation CFC 4000L, Оригинальная инструкция по эксплуатации

Страница: 44 / 56

Description
5-4
5.4 Operation of converter 6012
The converter box 6012 is specially designed and
adapted for the connection of the compact flame control-
ler type CFC 4000. This converter box will expand the va-
riety of functions of the CFC series and to use them in the
maximum range.
At first they can be used as a power supply which is spe-
cially designed for the compact flame controllers. With its
wide range input of 100 – 240 V AC it is very easy to use.
For higher loads on the flame relay the converter boxes
are including a secondary relay which is controlled by the
internal flame relay of the CFC but which is designed for
up to 250V AC and 1A.
The main application of the 6012 is the additional current
output of 0(4) – 20mA generated by the main flame flicker
frequency and which is in parallel to the original current
output of the CFC.
The main flame frequency is evaluated by a special algo-
rithm and will be transmitted as a serial RS 232 signal to
the converter box 6012.
By using the USB connector on the front plate all data can
be visualized at a connected computer. This function is
restricted to read only.
It is possible to connect up to 64 x 6012 and therefore
CFC 4000 together in one loop. By using a special visua-
lization software all 64 CFC can be monitored in parallel.
Each box and therefore burner will be addressed by itself
individually with the rotary switch and two DIP switches so
that every CFC can be displayed at every time. Further-
more it is not necessary to do any additional changes in-
side the CFC if it has to be changed.
The software CFC-NET allows comparison and
visualization of parameters such as amplitude, frequency
and DC signal from the connected compact flame
controller.
The CFC 4000 is remote programable via the Converter
6012, the software CFC-NET in the control room comput-
er and a USB safety key in the computer.