10
BEFORE WASHING CLOTHES
IF YOUR WASHING MACHINE IS NOT NEW
you will need to perform this
procedure to help remove any detergent buildup that may contaminate your
clothing.
1. Do not put clothes in the washer at this time.
Set your machine to its largest load setting, cold water only.
2. Start the washer and let it run through every cycle.
3. Once it has finished, repeat Steps 1 and 2 three more times.
Depending on the age and severity of detergent buildup,
it may be necessary to perform Step 3 several times.
NOTE:
If you have a front loading washer, odors can develop
due to stagnant water left inside. If musty odors develop
it may be necessary to run a commercially available cleaner made
especially for front loading washers to eliminate such odors.
CAUTION:
To avoid the possibility of water damage, should a
hose leak, always have faucets accessible and turn off
faucets when washer is not in use.
IF YOUR WASHING MACHINE IS NEW,
skip this section and continue
below.
BEFORE USING YOUR LAUNDRY PRO 2.0 FOR
THE FIRST TIME
USING YOUR LAUNDRY PRO 2.0
DETERGENT AND FABRIC SOFTENER
You may choose to continue to use detergent and/or fabric softeners if desired. However, to completely
experience all the benefits of your new Laundry Pro 2.0, we recommend washing using nothing but cold water.
NEVER apply detergent directly to dry clothes. Allow washer to fill, then add detergent to prevent staining on
clothes.
COLD
HOT
NORMAL OPERATION
Using your Laundry Pro 2.0 is as simple as turning on the washing machine.
Laundry Pro 2.0 is designed to use the COLD/COLD setting of your washing machine.
HEAVY STAINS
For heavy stains, pre-treat area, apply pre-treater, rub gently and let stand for several minutes.
Wash as normal.