12
9. Maintenance
9.1 Cleaning, disinfection and sterilization
1) The tip can be cleaned with clean water as well as can be cleaned in an ultrasonic cleaner.
2) After each use, please sterilize the tip under high temperature and
high pressure (134°C, 0.22MPa) for at least 4 minutes.
3) If the other accessories need to be cleaned or disinfected, please use gauze to pick up a
small amount of water or disinfectant to wipe the surface. Do not soak.
4) Do not use volatile and diffluent solvents for cleaning, which will damage the surface of the
device or cause the markings on the machine to fade.
8.2 Daily maintenance
1) When the device is not used, please turn off the power and unplug
the power supply plug.
2) If the GPro P1 Gutta Percha Obturation Pen is in a low battery state for a long time, the
service life of battery will be shortened. Please charge it in time if the battery level is low.
3) When the device is not used, please charge it for 1 hour once a month.
8.3 Repair of device
This product does not contain self-repairing spare parts. Repair should be carried out by a
designated professional or special repair shop.
