6
2.1 Install tip
Danger:
Do not turn on the device for tip installation
Hitting the heating button by mistake may cause scald on fingers.
Note:
See Turn device on/off in Operation
Select the right tip size
Hexagonal plug on the tip allows varies tip orientation
Plug the tip into heating chamber completely
Note:
To remove the tip, hold near the turn of the tip and gently pull out
Warning:
Needle remains hot after use. Wait till display 0 °C
Warning:
Before each use, clean, disinfect and sterilize the tip
Do not autoclave this device.
Do not immerse this device into chemical disinfectant.
Turn on device
2.2 Fit insulation sleeve
Cover the thick part of the tip connecting the heat chamber
Note:
Tip should not be covered
Installed properly
Bad connection
