7
1. Features
• Ergonomic design, small size. The max diameter less than 28mm. The head holding
part is just 16mm.Therefore dentists can get better sight and more convenient
operation
• “Multi - position type head" allows direction of contra angle to be changed easily.
• The LCD panel enhances user friendliness.
• Operates continuously for more than 2 hour (Dependent upon rated load)
• Memory for up to 5 programs. RESET bottom can be use once the error occurs.
• The auto reverse function is activated depending on the Comparison between load
and set torque. A wide variety of functions such as “AUTO REVERSE", “AUTO
STOP”,“AUTO REVERSE OFF", “REVERSE” and “AUTO RECIPROCATINg” are
available.
• The motor can be turned on and off by pressing the ON/OFF key. Alternatively the
unit can be operated by holding down the ON/OFF key during operation and letting
go of the ON/OFF key to stop the handpiece.
• The motor softly starts. Since the rotation briefly stops before changing direction
there are no vibrations and shocks during the change of directions.
• The motor will be turned into sleeping mode without any action in 10 minutes, click
"power" key to wake up
• The rotating speed and torque can be compensated perfectly by the controlling chip
• Charging interface is designed as MICRO USB
• 90 minutes, battery will be fully charged.
• The contra angle provided for this product can be autoclaved at 135°C (excluding
the motor).