FCC Class B Compliance Statement
Information to the User
NOTE
:
This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to Part 15 of the FCC Rules and
meets all requirements of the Canadian Interference-Causing Equipment Regulations (ICES-003). These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the equipment on and off, the user is
encouraged to try to correct the interference by one or more of the following measures:
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment and receiver.
•
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
•
Consult the dealer or an experienced radio/T.V. technician for help.
beyerdynamic GmbH & Co. KG is not responsible for any radio or television interference caused by unauthorized modifications of this
equipment or the substitution or attachment of connecting cables and equipment other than those specified by beyerdynamic GmbH & Co. KG.
The correction of interference caused by such unauthorized modification, substitution or attachment will be the responsibility of the user.
The use of shielded I/O cables is required when connecting this equipment to any and all optional peripheral or host devices. Failure to do
so may violate FCC and ICES rules.
FCC-DECLARATION
OF
CONFORMITY
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1)
This device may not cause harmful interference, and
(2)
This device must accept any interference received, including interference
that may cause undesired operation.
Manufacturer:
beyerdynamic GmbH & Co. KG
Theresienstrasse 8
D- 74003 Heilbronn, Germany
U.S. Responsible Party:
beyerdynamic North America
56 Central Avenue
Farmingdale, NY 11735, USA
Contact Person:
Wolfgang Luckhardt
Phone: Tel. (631) 293 3200
Fax: (631) 293 4463
Type of Equipment: Simultaneous Interpretation System SIS
Model Names:
SIS 121, SIS 122, SIS 123, SIS 1202
Classification:
Class B digital device
We hereby declare that the equipment bearing the trade name and model number specified above was tested conforming to the applicable
FCC rules under the most accurate measurement standards possible, and that the necessary steps have been taken and are in force to
assure that production units of the same equipment will continue to comply with the Commission’s requirements.
October 12, 2004
Signature:
