7
To set the days of the week:
Press the
button, each time you press the day icon, it jumps from left to right and flashes.
Weekly timer function:
The electric fireplace has a weekly on / off timer function.
button.
Weekly timer settings, on and off timer activation.
button.
(
Please do not schedule the fireplace at a time when you
cannot monitor its operation!)
CONTROL BY REMOTE:
Remove the foil from the battery compartment of the remote control, and the remote control will be
ready for use.
RELEASE
PUL
L
OPEN
PUSH
CR2025
RELEASE
CR2025
Use the same buttons you found on the fireplace control. The control of the remote control works with infrared technology, so point the
remote towards the fireplace you want to use it properly. The infrared signal works from a maximum distance of 4-5 meters, make sure
that no objects or people get between you and the fireplace during the control.
Temperature correction:
If you find that the temperature measurement of the device is inaccurate, you have the opportunity to fine-tune and calibrate it. To
do this, press the button marked
for 3 seconds. The display is now flashing. The display will show 0, which you can change
by pressing the + and - buttons. This allows you to increase or decrease the measured temperature by the set °C value. Fine tuning is
possible in the range of -9 to +9 degrees.
Overheating protection:
If the device overheats for some reason, it will turn off automatically. Remove any objects that caused overheating. To safely restart the
fireplace, turn off the power for 15 minutes. Once the appliance has cooled down, it will switch on again.
Cleaning:
Always switch off, unplug and let the appliance cool down before cleaning. Use a dry cloth or vacuum cleaner to remove dust. The
housing should only be wiped with a slightly damp cloth, making sure that no moisture enters the device! Do not use chemicals or
alcohol during cleaning!
Storage:
Store in a cool, dry place. Do not throw away the product box. You can use it to store the device when not in use. Caution Only put the
appliance back in its box if it has cooled down properly.