6
High and low temperature adjustment:
Press and hold the „HEATER” button
on the fireplace control panel for 3 seconds, then switch the device between
0
C and
0
F. (note:
This function is not available on the remote control.) Start temperature 22
0
C (72
0
F), if the room temperature is lower then the device
starts in high heating mode, if you want to switch to low heating mode, press the HEAT button
to switch (after the first press the
display shows the current mode, after pressing it again it switches to the desired mode, if you press the button again, it switches off
the heating mode. (H / L / O = high / low / off heating). You will hear a signal after each change, if you want to deactivate the heating
function, you can also reduce the temperature with the „DOWN” button.
Time adjustment:
You can set the timer from 0 to 12 hours. After switching on, the timer is set to 0 hours, You can set the timer using the touch panel on
the unit or the TIME button on the remote control, Once the fireplace is activated and you press the TIME button , “00” will flash on
the display, then the number of times you press the TIME button it will change.
(00-30-1H-2H-3H-4H-5H-6H-7H-8H-9H-10H-11H-12H).
When you have reached the time you want to schedule, do not press the button again.
After the display flashes for 10 seconds and there is no status change, the display will show the room temperature again.
Temperature increasing buttons:
Temperature change range from 15
0
C (60
0
F) to 36
0
C (97
0
F), (default temperature 22
0
C / 72
0
F), press the up button and after each
press the temperature will rise by 1
0
C / 1
0
F. After a long press, the temperature will rise continuously.( Note This function does not work
with the remote control.) When in temperature setting mode, the temperature part will flash on the display. If no button is pressed for
10 seconds, the display will reset.
Temperature adjustment:
Temperature change range from 15
0
C (60
0
F) to 36
0
C (97
0
F), (default temperature 22
0
C / 72
0
F), press the up button and after each
press the temperature will decrease by 1
0
C / 1
0
F. After a long press, the temperature will decrease continuously. (Note This function does
not work with the remote control.) When in temperature setting mode, the temperature part will flash on the display. If no button is
pressed for 10 seconds, the display will reset.
DIMMER function:
The flame brightness is at maximum by default. Flame brightness has 5 levels. If you press the DIMMER button
, the brightness will
decrease and after each press the brightness will decrease if the display shows -1, you have reached the darkest mode, if you press the
DIMMER button
again, it will reset (brightest mode)
Flame color changing:
By default, the flame is orange when you press the COLOR MODE button
on the remote control, the display temperature display
changes to a color display:
(C1, C2, C3, C4, C5 , C6 , C7, C8, C9)
Each time you press a button, it will change color:
(C1) orange, (C2) green, (C3) blue, (C4) white, (C5) green + orange, (C6) blue, (C7) white, (C8) green + blue,
(C9) green + white
Child safety function:
The electric fireplace has a locking function that you can both activate using the remote and the panel, after use, press the “up” and
“down” buttons simultaneously for 3 seconds or press and hold the child lock button on the remote control. You will then hear a
sound indicating that the fireplace is closed, The buttons do not work. If you want to control the appliance again, press and hold the „up”
and „down” buttons for 3 seconds or the child lock button on the remote control for 1 second, you will hear a signal and the child lock
will be released.
Time set hour:
Press the
button once to set the hour unit (setting range 00-23)
Time set minute:
Press the
button once to add one minute (setting range 00-59)