Beurer BM 96 Cardio, Инструкция по эксплуатации

Страница: 54 / 272

54
Saving, displaying and deleting measured values
User memor
y
The results of every successful measurement are stored together with the date and time. If there
are more than 60 measurements, the oldest measurement is lost.
• Press the START/STOP button . Select the relevant user memory by pressing the memory
button M1 (for user
1
) or M2 (for user
2
).
• Confirm your selection by pressing the START/STOP button 3 seconds. The device will au-
tomatically switches itself off.
Aver
age values
• Press the START/STOP button . The last stored measured value in the selected user mem-
ory is displayed.
• Press the function button . lights up on the display. The average value of all saved measured
values in this user memory is displayed.
• Press the function button . lights up on the display. The average value of the morning meas-
urements for the last 7 days is displayed (morning: 5 a.m. – 9 a.m.).
• Press the function button . lights up on the display. The average value of the evening meas-
urements for the last 7 days is displayed (evening: 6 p.m. – 8 p.m.).
Individual
measur
ed
values
• When the function button is pressed again, the last individual measured values in each case are
displayed with the date and time (for example ).
• By pressing the function button again, you can view your individual measured values.
• To switch the device off, hold the START/STOP button for 3 seconds.
Deleting
measur
ed
values
• To delete the memory of the selected user, press the function button for 5 seconds.
• appears on the display. All the values in the selected user memory have now been deleted.