Beurer BM 96 Cardio, Инструкция по эксплуатации

Страница: 52 / 272

52
If the values of systole and diastole fall into two different categories (e.g. systole in the high normal cat-
egory and diastole in the normal category), the graphical classification on the device always shows the
higher category; for the example given this would be high normal.
Blood pressure value category Systole
(in mmHg)
Diastole
(in mmHg)
Action
Level 3: severe hypertension ≥ 180 ≥ 110 Seek medical attention
Level 2: moderate hypertension 160 – 179 100 – 109 Seek medical attention
Level 1: mild hypertension 140 – 159 90 – 99 Regular monitoring by doctor
High normal 130 – 139 85 – 89 Regular monitoring by doctor
Normal 120 – 129 80 – 84 Self-monitoring
Optimal < 120 < 80 Self-monitoring
Source:
Atrial fibrillation
This device can identify atrial fibrillation when measuring the blood pressure and if necessary, indicates
this after the measurement with the symbol
AFIB
. If you have atrial fibrillation, the displayed blood pressure
value may not be correct. Atrial fibrillation is defined by an irregular and oftenrapid heart rate increasing the
risk of strokes, heart failure and other heart-related complications. Atrial fibrillation can only be determined
through an examination by your doctor. If the symbol
AFIB
is shown on the display after the measurement
has been taken, repeat the measurement. Please ensure that you rest for 5 minutes beforehand and do
not speak or move during the measurement. If the symbol
AFIB
appears frequently, please consult your
doctor. Selfdiagnosis and treatment based on the measurements can be dangerous. Always follow your
GPs instructions.
Resting indicator measurement (using HSD diagnostics)
The most frequent error made when measuring blood pressure is taking the measurement when not at
rest (haemodynamic stability), which means that both the systolic and the diastolic blood pressures are
incorrect in this case. While measuring the blood pressure, the device automatically determines whether
you are at rest or not. If there is no indication that the circulatory system is not sufficiently at rest, the
1
2
symbol (haemodynamic stability) appears in the display and the measurement can be recorded as a
reliable blood pressure at rest value.