Beurer medical GL 50 evo, Руководство пользователя

Страница: 16 / 44

16 Beurer GL50 evo
2
Setting the timer
You can set a timer on the blood glucose monitor. A beep sounds when the timer elapses.
To set a timer, proceed as follows:
1. Switch on the blood glucose monitor by briefly pressing and
holding the scroll wheel.
2. Rotate the scroll wheel until the arrow is pointing towards
“Settings”, then press the scroll wheel to confirm.
• All values
• Average
• Settings
Back
3. Rotate the scroll wheel until the arrow is pointing towards
“Timer”, then press the scroll wheel.
• Timer
• Alarm
• Date/time
• Bluetooth on/off
4. Rotate the scroll wheel until the hour is marked, then press the
scroll wheel. Now set your desired timer hour by rotating the
scroll wheel and press the scroll wheel to confirm.
5. Use the same procedure to set the timer minute.
6. In order to start the timer, rotate the scroll wheel to “Start” and
press the scroll wheel.
Timer
Start Stop
3
Setting the alarm
You can set an alarm on the blood glucose monitor. A beep sounds at the set alarm time.
You can set 4 different alarm times. To set an alarm, proceed as follows:
1. Switch on the blood glucose monitor by briefly pressing and
holding the scroll wheel.
2. Rotate the scroll wheel until the arrow is pointing towards
“Settings”, then press the scroll wheel to confirm.
• All values
• Average
• Settings
Back
3. Rotate the scroll wheel until the arrow is pointing towards
“Alarm”, then press the scroll wheel.
• Timer
• Alarm
• Date/time
• Bluetooth on/off
4. Select one of the 4 alarm times with the scroll wheel and press
the scroll wheel.
5. Now set your desired alarm hour by rotating the scroll wheel
and press the scroll wheel to confirm. Use the same procedure
to set the alarm minute.
• Alarm
• 12:00
• 22:00
• Off