Beurer medical GL 50 evo, Руководство пользователя

Страница: 14 / 44

14 Beurer GL50 evo
date next to the hourglass symbol ). This does not apply for individual test strips, which are to be
used immediately after opening the film packaging.
• Discontinue use of the test strips if one of the two expiry dates ( /
18 M
) has passed.
• You can touch any part of the test strip with clean, dry hands.
• Use the test strip for measurement immediately after removing it from the box/film packaging.
• Do not bend, cut or otherwise modify the test strips.
• Do not use test strips that have come into contact with fluids.
Storing test strips
Note
• Keep the test strips in a cool, dry place above +2°C and below +30°C. Do not expose the test strips
to direct sunlight or heat. Do not store in your vehicle, in the bathroom or in a cooling appliance.
• Permitted relative air humidity below 90%.
• The test strips must be stored in the original box/unopened film packaging – never use other
containers.
4 i
nitial use and basic settinGs
In order to activate the device, move the ON/OFF switch into the “ON” position.
on
off
The ON/OFF switch is used as a keylock for the scroll wheel.
Information regarding initial use
• Before putting the blood glucose monitor into operation for the first time, you must fully charge the
rechargeable battery. To charge the rechargeable battery, proceed as directed in the following chapter.
• Before the initial use, no battery symbol will be displayed during charging.
4.1 Charging the battery
1
Remove the lancing device from the blood glucose monitor.
2
Connect the blood glucose monitor to a computer via the USB port.
Leave the blood glucose monitor to charge for at least 2 hours.
3
Once you have fully charged the rechargeable battery of the blood glucose monitor, disconnect
the blood glucose monitor from the computer.
4 Place the lancing device back on the blood glucose monitor.
After charging the battery, wait 30 minutes before carrying out a blood glucose measurement.