Beuchat VOYAGER-2G, Руководство по эксплуатации

Страница: 25 / 106

25
SET F ( NORM FO2)
Sequence >> FO2 Gas 1 >> FO2 Gas 2 >> 50% Default
When the FO2 50% Default is set Off, FO2 will remain set at the last settings saved during
that period of activation.
When the FO2 50% Default is set On and FO2 is set for a numerical value, 10 minutes
on the surface after that dive the FO2 will be displayed as 50 and further dives will be
calculated based on 50% O2 for oxygen calculations and 21% O2 for Nitrogen calcula-
tions (79% Nitrogen), unless FO2 is set before the dive.
FO2 will continue to reset to the FO2 50% Default after subsequent repetitive dives until
24 hours elapse after the last dive, or the FO2 50% Default is set Off.
FO2 set to Air
The default FO2 settings each new activation period will be Air.
When FO2 Gas 1 is set for Air -
> calculations are the same as when FO2 is set for 21%.
> it will remain set for Air until set for a numerical FO2 value (21 to 100%).
> O2 data (such as PO2, O2%) will not be displayed at any time during the dive, on
the surface, or in Plan mode.
> MODs (Max Operating Depths) will not be displayed on the FO2 set screen.
> internally, the VOYAGER 2G will keep track of O2 data for use if FO2 for Gas 1 is
subsequently set for Nitrox for repetitive dives.