STEP 8
Install the head and bracket onto fasteners.
STEP 9
Tighten fasteners.
STEP 10
Wrap male threads on nipple with PTFE tape (not
included) and install into the inlet side of head (left).
Install shut-off valve to nipple.
IMPORTANT NOTE: Hexagonal sockets on the head do
not rotate.
STEP 11
Install inlet (left) and outlet (right) piping. Be sure to use
PTFE tape.
IMPORTANT NOTE: Hexagonal sockets on the head do
not rotate. Do not overtighten.
STEP 12
Remove sanitary cap from cartridge. aligning downward
arrow on head assembly with upward arrow at top
of cartridge label. a quarter turn to the right until
cartridge comes to a complete stop.
STEP 13
Slowly turn on inlet water supply. Be sure shut-off
valve is in the “ON” position. Flush 10 gallons of water
through system before use (approximately 5 minutes).
IMPORTANT NOTE: Check system for leaks.
2
1
2
2
2
