background image

FILTER REPLACEMENT INSTRUCTIONS

1.  Place towel under fi lter to collect any residual water 

during replacement fi lter change-out.

2. Grasp 

fi lter and turn to the left (counterclockwise) until 

fi lter comes to a complete stop (water automatically turns 
off). Water may leak momentarily from vent tube. This is 
normal. Gently pull fi lter downward to remove.

3.  Remove sanitary protective cap from new replacement 

fi lter.

4.   Ensure both o-rings are present on the replacement fi lter 

and are seated into grooves; moisten o-rings with water. 
DO NOT use any petroleum products to lubricate the 
o-rings.

5.   Insert replacement fi lter into fi lter head assembly aligning 

downward arrow on head assembly with upward arrow 
at top of cartridge label. Turn replacement fi lter one 
quarter turn to the right (clockwise) until it stops. When 
fully engaged, the top surface of the fi lter will be fl ush 
with the bottom of the fi lter head assembly. 

6.   Open faucet and run water for a minimum of 10 gallons (approximately 5 minutes). While system is fl ushing, 

check for leaks. Repair any leaks as needed before continuing. 

7. Close 

fi lter system faucet. System is now under pressure and can be inspected for leaks. Repair any leaks as 

needed before continuing. 

The system is now ready for use. 

LIMITED ONE YEAR WARRANTY

BETTER WATERS warrants this Product consisting of one (1) head assembly and one (1) replaceable fi ltration cartridge, 
manufactured by 3M Purifi cation Inc., to be free from defects in material and workmanship for one (1) year from 
the date of purchase.  The warranty does not apply to actual useful life of the fi ltration cartridge.  Neither BETTER 
WATERS nor 3M Purifi cation Inc. shall be liable for system failure(s) due to improper maintenance.  This warranty 
does not cover failures resulting from abuse, misuse, alteration or damage not caused by BETTER WATERS or 3M 
Purifi cation Inc. or failure to follow installation and use instructions. If the Product is defective BETTER WATERS will 
replace the Product or refund your Product purchase price.  Neither BETTER WATERS nor 3M Purifi cation Inc. will be 
liable for any indirect, special, incidental, or consequential damages arising from the use of this Product. Some states 
do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation may not 
apply to you. To obtain warranty service, email your request to [email protected], or mail to BETTER 
WATERS, PO Box 8545, JAF Station, New York, NY  10116.  Do not ship product(s) unless instructed and with address 
provided depending on the nature of the claim.  Proof of purchase (original sales receipt or documentation of web 
transaction) must accompany the warranty claim, along with identifi cation of the Product and model number, and a 
complete description of the alleged defect. This warranty gives you specifi c legal rights and you may have other rights 
which vary from state to state, or country to country. Please visit www.betterwaters.com, for details.

Manufactured by:

3M Purifi cation Inc.
400 Research Parkway
Meriden, CT 06450, U.S.A.
Tel     (866) 990-3869
 (203) 

237-5541

Fax  

(203) 238-8701

www.3Mpurifi cation.com

Please recycle. Printed in U.S.A.
© 2010 3M Company. All rights reserved.
INSTR7114 0710

1

2

Remove Existing

Cartridge

1

2

Insert New Cartridge

Содержание XL7000

Страница 1: ...d use MUST comply with all state and local plumbing codes This system is rated for 2 5 gpm 9 46 lpm flow rate Protect from freezing remove filter cartridge when temperatures are expected to drop below 40 F 4 4 C Do not install systems in areas where ambient temperatures may go above 110 F 43 3 C Do not install on hot water supply lines Install only on cold water line The maximum operating water temp...

Страница 2: ...r leakage Mount system in such a position as to prevent it from being struck by other items used in the area of installation Ensure that the location and fasteners will support the weight of the system when installed and full of water STEP 4 Draw a line using a level on the mounting surface STEP 5 Mark the locations for the fasteners either by measuring the distance between the bracket holes or us...

Страница 3: ...ht piping Be sure to use PTFE tape IMPORTANT NOTE Hexagonal sockets on the head do not rotate Do not overtighten STEP 12 Remove sanitary cap from cartridge aligning downward arrow on head assembly with upward arrow at top of cartridge label a quarter turn to the right until cartridge comes to a complete stop STEP 13 Slowly turn on inlet water supply Be sure shut off valve is in the ON position Flu...

Страница 4: ...y does not apply to actual useful life of the filtration cartridge Neither BETTER WATERS nor 3M Purification Inc shall be liable for system failure s due to improper maintenance This warranty does not cover failures resulting from abuse misuse alteration or damage not caused by BETTER WATERS or 3M Purification Inc or failure to follow installation and use instructions If the Product is defective BETT...

Отзывы: