Install
(Multiple person assembly)
Install
23. To connect the mixer to the water supply, you will require
27. Seal the outside of the enclosure, along the front edge
2 x flexi connectors with 1/2" female nut (not supplied)
where any touching surfaces meet.
24. When looking at the front of the enclosure the hot supply
28. Seal along the back and side edges where the frame
must be connected to the left inlet, failure to do this will
meets the tray, ensuring not block the drainage slots
cause issues with the thermostat function
25. When installing the flexi-tails do not create flat spots,
DO NOT SEAL INSIDE
kinks or bend excessively as this could result in damage to
the tail and affect performance.
DO NOT USE FOR AT LEAST 24 HOURS
26. Turn on water supply and check for leaks
Front
Hot surface
Flexi-pipes not supplied
Rear
Steam generator
SEPT 18 - V6BB
