Information
(Electrical work to be carried out by a Qualified Electrician)
Parts
> This installation is a multiple person installation
> Ensure the glass is not chipped or cracked before installation
> AC Power supply of 220V + 10% 50 Hz which should be connected to
to an earthed 13amp fused spur switch, outside the bathroom.
> Supply wiring to the unit should be no less than 4mm2
> Water supply pressure 1.5 - 4 bar
> The hot water supply should not exceed 65c
> The water supply pipes should be fitted with isolation valves and
be located to allow easy access.
> The steam generator and steam outlet become hot during use and
remain hot for a period after use, therefore contact with either can
cause injury, do not touch until fully cooled.
> After use always turn off the unit at the switch.
> Any maintenance should only be carried out once the power supply
to the unit has been isolated
> Any maintenance should only be carried out once the water supply
to the unit has been isolated
> Separate electrical appliances producing steam or humidity are not to be used
inside the cabin.
Tools Required
No
Description
Qty
No.1
Chrome rail
2
No.2
Fixed panel
2
No.3
Door
2
Silicone Sealant Spirit Level Screwdriver
No.4A
Shower kit black back panel
1
No.4B
Shelf black back panel
1
No. 5
Control panel inc steam box & electrics
1
No.6
Roof - inc speaker, fan and lights
1
Spanner Drill Tape Measure Hex Key
No.7
Tray inc waste
1
SEPT 18 - V6BB
