Parts
Tray Install
!
Check for removal of any protective film/tape
Before installatiing the tray, connect the waste pipe (X) and fixing ring
to the waste body, once connected tighten the ring using the screw.
Place the tray inc waste into the required location
Once in position check the tray is level
If levelling is required, adjust the legs on the tray
Check the tray using a spirit level
Once the tray is level, tighten the securing nuts on the legs
After levelling, connect the pre-fitted waste tube to the
Check all parts are present before commencing the installation
household waste pipe using an adequate sealing method.
Check for leaks before continuing the installation
Also check sufficient fall is provided for the waste pipe
Waste Pipe
Waste
SEPT 18 - V6BB
