BETCO GS15, Руководство пользователя, Страница: 9 / 21

11.5 SQUEEGEE ADJUSTMENT
The floor wipers are fitted with pressure adjustment
devices so as to suit different types of surface.
To regulate the pressure of the rubber lips turn
the adjustment device (1 FIG. 8) clockwise to
increase pressure or counter-clockwise to
reduce it.
11.6 FRESH WATER TANK (SOLUTION)
This contains the detergent solution (3.7 gal.) and is filled in the following way:
1. Lift the cover (13 FlG. 3) and tip it onto the front part of the machine.
2. Fill the fresh water tank (4 FIG. 3).
The maximum water level is 1.5 in. from the top of the tank.
3. Add detergent according to the instructions given by the detergent manufacturer.
4. Lower the cover.
11.7 WASTE WATER TANK
1. Lift the cover and tip it onto the front part of the machine.
2. Pull out the waste water tank by gripping it by the handles positioned at the sides of the opening and pulling
it upwards.
3. Pour the waste water into a wash basin or drain and rinse it with fresh water.
4. Put the tank back on the machine and lower the cover. Make sure it is firmly shut before starting your work.
Staff up the suction system and try lifting the cover: difficulty lifting the cover means that it is firmly shut.
11.8 ACCESSORY TANK
This contains the detergent solution (1.8 gal.) and is filled in the following way:
1. Lift the cover (13 FIG. 3) and tip it onto the front part of the machine.
2. Fill the fresh water tank (24 FIG. 3).
11.9 SUCTION SYSTEM FLOAT
When the level of dirty water in the tank has reached its maximum level, a safety system (float) stops
the machine’s suction system.
When the float is activated, you will notice that the noise of the suction motor changes immediately. This
means you must take the necessary corrective measures.
Stop the machine immediately and empty the tank as described in the previous paragraph.
8
NOTE
Fig. 8
NOTE