BETCO GS15, Руководство пользователя, Страница: 15 / 21

14
21.0 TROUBLESHOOTING
Trouble Cause Remedy
The machine does not turn on. ..............The ON/OFF switch is broken. ....................................Replace.
The fuse has blown. ....................................................Replace.
The power cord is unplugged. .....................................Plug in.
The roll brush doesn’t work. ..................The main switch is off..................................................Turn on main switch.
.
There is an electrical or mechanical fault....................Check the motor,
condensator, and the
drive belt.
The machine does not ...........................The roll is worn............................................................Replace.
clean uniformly.
The floor wiper does not .......................The edge of the rubber blades in contact ..................Replace the worn blades.
suck up all the dirty liquid. with the floor is blunt.
The pressure of the floor wiper is not .........................Regulate the floor wiper.
correctly regulated.
There is obstruction or damage to the ........................Remove obstructions and
floor wiper or the connection.
repair any damage, replacing
rubber support.
The floor wiper does not suck ..............The suction switch is off. .............................................Turn the suction switch on.
up the dirt.
The suction tubes are blocked. ...................................Free the tubes of blocked dirt.
The suction motor does not work. ...............................Check the electronic
connections of the suction
motor and if correct replace.
Solution is not coming out. ....................The pump switch is off.................................................Turn the pump switch on.
The solution tank is empty...........................................Fill the tank.
Blockage in the filter. ...................................................Clean the filter.
Blockage in the tubes carrying the solution. ...............Clean the tube.
The pump thermal switch has tripped. ........................Allow the pump to cool,
turning it off for 15 minutes.
The pump is damaged. Repair or replace the pump.