BETCO GS15, Руководство пользователя, Страница: 13 / 21

17.3 CHANGING THE SQUEEGEE BLADES
If the squeegees are worn and their action is insufficient (even after they have been washed by hand), we
recommend you replace them.
1) Remove the floor wiper (see par. 11.3.1).
2) Remove the drying blade and the counter-blade from the support.
3) Install the new blades making sure that the drying blade (without teeth) is placed on the open side of the
support and that the counter-blade is on the opposite side.
4) Re-assemble the floor wiper (see par. 11.3.2).
ATTENTION: the stopping point of the support and the end of the aluminum squeegee support must match
perfectly this does not happen, the support has been mounted back to front).
17.4 PROLONGED IDLE PERIODS
When the machine is at rest the floor wiper and the brush must be raised to avoid deformation of the drying
blades and bristles.
To do this, place the handle in a vertical position and tip it forwards. The machine will be lifted by a specifically
designed device.
During long.periods of inactivity, wash out with a decalcifying solution as described in the instructions for “periodic
maintenance.”
18.0 MARKING AND CERTIFICATION
The
Dirt Dragon
model has been examined in accordance to EEC directive 89/392 and subsequent modifications.
The suitability is certified by the serial number label found on the machine, which bears the CE mark, and by the
declaration of conformity which accompanies the following booklet.
19.0 DISPOSAL OF THE MACHINE
Being an assembly of various parts, we recommend you to dismantle the machine and separate the resulting
materials in accordance to the laws in force.
DO NOT USE SCRAPS AS SPARES. KEEP THEM OUT OF THE REACH OF CHILDREN.
12