17
30. CLEAN THE RECOVERY TANK
1. Disconnect the drain hose from the clamps and fold over the tube (
1
) to
prevent splashing when the cap is removed. Remove the cap and slowly
release tension on the folded area to completely drain the solution tank.
WARNING: Always wear gloves when doing this operation to pro-
tect yourself from contact with hazardous chemicals.
WARNING: Before performing any maintenance, remove the keys
from the control panel and disconnect the battery connection to
the machine.
2. Open the recovery tank lid (
2
) and insert the support prop into the hook (
3
)
on the underside of the lid.
3. Clean and rinse the recovery tank and the vacuum hose leading to the
squeegee assembly.
4. Close the cap on the drain hose and return it to the holding clamps.
5. Close the recovery tank lid by lifting it slightly to disengage the support prop
(
3
) and lowering it until it is closed.
31. CLEAN THE VACUUM MOTOR FILTER
1. Open the recovery tank lid (
2
) and insert the support prop into the hook (
3
)
on the underside of the lid.
2. Remove the vacuum filter housing (
4
) by rotating it clockwise
3. Release the retaining clip (
5
) on the filter
4. Remove the suction filter (
6
)
5. Use clean water to wash dirt and debris from the walls and base of the filter
6. Reassemble all of the items.
WARNING: Always wear gloves when doing this operation to pro-
tect yourself from contact with hazardous chemicals.
WARNING: Before performing any maintenance, remove the keys
from the control panel and disconnect the battery connection to
the machine.
DAILY MAINTENANCE
