19
34. PAD DRIVER/BRUSH REMOVAL
1. Turn the key switch to the ON position
2. Turn the I-Drive selector to the Transport Mode position (
A
) to lift the brush
deck from the floor if it is not already up.
3. Turn the key switch to the OFF position and remove the key from the control
panel.
4. Reach under the brush deck and rotate the brush counter-clockwise until it
unseats from the brush drive plate. The image to the right shows the rota-
tion direction to unlock the right side brush. The rotation is opposite for the
left side brush.
WARNING: Always wear gloves when doing this operation to pro-
tect yourself from contact with hazardous chemicals.
WARNING: Before performing any maintenance, remove the keys
from the control panel and disconnect the battery connection to
the machine.
If using brushes on this machine, it is advised to rotate the left and right side
brushes every day. However, if the brushes have not been rotated for a lengthy
period of time and have deformed bristles, it is advised to reassemble them in
the same position to prevent an overload on the brush motor as well as exces-
sive vibration.
DAILY MAINTENANCE
