Beta Three TQ-22, Справочное руководство

Страница: 52 / 64

-44-
UG-TQ22-EN (V2.2-211226)
TQ-22
Mixer Reference
manual
2.9. System settings
The system setup menu is used to set or browse system parameters and machine configuration.
Click the button on the panel, or on the host screen or on APP home
interface to enter the system settings menu, as shown below.
NOTE: The part with no buttons at the bottom of the gray is only used as an alternate
function for future expansion, and it is not available for use at the moment !!
01 Click to enter the Automix menu. 02 Click to enter the mute groups setting menu.
03 Click to enter the signal generator settings menu.
0
4 Click to enter the system upgrade menu.
05 Click to enter the permission control management
menu.
06 Click to clear all mute settings, including channel
mute and mute grouping. Click DCA to clear the
DCA's mute setting and set the DCA volume to
0dB. Click to clear all SOLO settings.
07 Reset all input channels to their initial state.
Reset all output buses to their initial state.
08 Restore the device to the factory settings.
User settings will be cleared.
09 Information about the mixer, such as hardware and
software version, date of manufacture, etc.
10 User-defined USER fader settings.
11 Set user interface parameters such as lighting, color,
software menu style, and more. (No such feature)
12 Set WIFI network parameters and system date
and time.
13 Return to the home page.
04 08
01
09
10
11
12
13
02
03
06 07 05