Beta Three TQ-22, Справочное руководство

Страница: 33 / 64

UG-TQ22-EN (V2.2-211226) - 25 -
TQ-22
Mixer Reference
manua
2.2.8 Configuration
The channel settings configure parameters such as channel name and output delay.
Note: For channel name / icon / color DIY, please refer to section 2.1.9.
01 In the navigation bar, click the index page or the
fader page button to switch to the page where the
channel is located. The small bright spot in the
figure is the gain position indication of the channel.
02 System setup button, click to enter the system
parameter control page. Same function as the
button
on the panel.
03 Scene button, click to enter scene control page, save
or load the scene parameters you need. It has the
same function as the
button on the panel.
04 Home button, click to return to the channel home
page.
06 Click to switch to the GEQ control page.
05 Click to switch to the PEQ control page. 08 Click to switch to the [copy to] control page.
07 Click to switch to the compressor control page. 10 Click to switch to the channel configuration
page.
09 Click to switch to the parameter preset page. 11 Click to switch to the channel overview page.
12 Channel name /icon / color, user can choose or set. Click to enter the setting menu. For details, refer to section 2.1.9.
13 Link, the two adjacent MONO channels are linked into a pair of stereo channels.
Only channel linking such as (AUX1, AUX2), (AUX3, AUX4), etc. are supported, and channel linkings such as (AUX2, AUX3), (AUX2, AUX3),
etc. are not supported. The parameters of the odd channel are automatically copied to the even channel when linked, and the phantom power
control is also copied.
14 Main L/R signal switch, this signal is output to
Main when lit.
15 Delay switch, the delay is valid when lighting.
16 The delay value of the current output channel is
displayed in different delay units.
Delay range: 1.34 ~ 500mS.
17 Current channel master control panel, adjustable
gain and mute, etc.
03 02 01
04
06
07
08
09
10
11
17
05
12 15 16 13 14